Remington Hair Clippers How To Use

REMINGTON Haircut Kit

Of import Condom INSTRUCTIONS

When using an electric appliance, basic safety precautions should always exist observed, including the following. Read all instructions before using this pilus clipper.
KEEP Ability ADAPTOR Away FROM H2o
Warning – TO REDUCE THE Adventure OF BURNS, Burn down, Electric Stupor OR INJURY TO PERSONS:

• Practicenon reach for an appliance that has fallen into water.
  Unplug it immediately.
• Exercise not apply while bathing or in the shower.
• Do not identify or drop into h2o or other liquid.
• Do not place or store this appliance where information technology tin fall or be pulled into a bath or sink.
• Except when charging, always unplug this appliance from the electrical outlet immediately after using.
• This apparatus is for household use simply.
• This apparatus is non intended for use past persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or pedagogy concerning use of the appliance by a person responsible for their safety. Keep the apparatus and the power string abroad from the edge of table or countertops and out of attain of children and persons with reduced physical, sensory or mental capabilities.
• This appliance is not a toy. Children shall be supervised to ensure they practice non play with this appliance.
• Use this appliance simply for its intended use as described in this manual.
• Do non use attachments not recommended by Remington.
• Keep the cord abroad from heated surfaces.
• Never operate this appliance if it has a damaged cord or plug, if it is
  not working properly, if it has been dropped or damaged, or if it has been dropped into water. If any of these things happen, return the apparatus to an authorised service center for test and repair.
• Never driblet or insert any object into any of the appliance'southward openings.
• Practice not use outdoors or operate where aerosol (spray) products are existence used, or where oxygen is being administered.
• Make sure the cord is disconnected from the hair clipper while storing this appliance and cord in a wet-free expanse. Do not store it in temperatures exceeding 60°C (140°F)
• Practice non use this apparatus with a damaged or broken cutter unit, as injury may occur. Always make sure blades are aligned properly.
• Always attach plug to apparatus and so the adaptor to the outlet. To
  disconnect, turn all controls to OFF, so remove adaptor from outlet, then detach power string from the hair clipper for storage.
• Exercise non apply an extension cord or a voltage converter with this apparatus.
• Do not wrap the cord around the appliance.

Remington strongly recommends that an approved Safety Switch (remainder current device) be installed to protect all bathroom ability outlets. Inquire an electrical contractor for advice.

SAVE THESE INSTRUCTIONS

HC7110AU PRECISION HAIRCUT KIT Apply & CARE INSTRUCTION Manual

Thank yous for purchasing your new Remington® Precision Haircut Kit. Inside this manual y'all will observe tips on using and caring for your hair clipper.

Cardinal PARTS

1. Stainless Steel Blade
2. On/Off Switch
3. Charging Indicator Lite
4. Adjustable Rummage (1-21mm)
5. Adjustable Comb (24-44mm)

Likewise Includes:

• Barbers Scissors
• Barbers Rummage
• Lubricating Oil
• Cleaning Brush
• Ability Adaptor

Most YOUR HAIR CLIPPER

HC7110AU Specifications
Power System	Cord/Cordless (Rechargeable)
Initial Charge Fourth dimension	24 Hours
Full Charge Fourth dimension	18 – 20 Hours
Run Time	40 Minutes
Indicators	Charging
Voltage Type	Unmarried

Power Arrangement: Cord/Cordless – can be used with or without the power string.
Charging Indicator: blood-red light that glows when the pilus clipper is being charged.
Voltage Type: Unmarried – 220-240V merely.

CHARGING YOUR Hair CLIPPER

Cordless Apply

• Before using your hair clipper for the first time, accuse it for 24 hours.
• Ensure the production is switched off.
• Connect the charging adaptor to the product and then to the mains. The charging LED light will display on the clipper.
• If the production is not going to exist used for an extended period of time (2-3 months), unplug information technology from the mains and store.
• Fully recharge your hair clipper when you would like to use it again.
• It is not recommended to use this hair clipper directly from the power outlet when it has been fully charged, notwithstanding, while using the pilus clipper in cordless mode if at that place is a noticeable drop in power, you can use the hair clipper direct from the power outlet.
• To preserve the life of your batteries, let them run out every half dozen months then recharge for 24 hours.

Corded Use

• Connect the charging adaptor to the product and so to the mains.
• When the cord is continued to the mains, a charging LED light is displayed on the hair clipper.

Caution: Extended mains (corded) but use will upshot in the reduction of the battery life.

HOW TO USE

Before Starting to Cutting

1. Inspect the hair clipper making sure information technology is free from hair and dirt.
2. Ensure that the pilus is thoroughly dry and tangle costless.
3. The blades on your pilus clipper should be oiled before every haircut.

Lubricating the Hair Clipper Blades

Simply identify a few drops of oil on the teeth of the blades. Use simply the light
grade oil supplied or a suitable alternative like sewing machine oil. Only this type of oil is suitable for the blades on your Remington pilus clipper. Do not utilize pilus oil, grease or whatever oil mixed with kerosene or whatever solvent as the solvent volition evaporate and go out a thick oil, slowing the blades.
If oil is not applied to the blades or only a small amount of oil is applied, this may crusade cutting problems. Blades will wear prematurely and not cut properly if they are not sufficiently lubricated. There may too exist a pulling sensation on the pilus.

Instructions for Hair Cutting

Note: For even cutting, allow the trimmer comb/blade to cut its way through the hair. Exercise non force it through speedily. If you lot are cutting for the first fourth dimension, start with the maximum length trimmer comb, until you know how short you would similar your hair to exist.
Note: The rummage guide lengths described for use in the steps beneath are an example only, if you lot want a longer or shorter hair cut you will need to adapt the comb guide lengths to arrange your requirements.

To Adhere a Comb

• Concur the comb with its teeth up.
• To adhere a comb, align the legs of the comb with the holes in the
  top of the clipper on each side of the blade and slide the legs into the trimmer until they click.
• To remove, firmly pull the comb straight up away from the clipper.

Rummage Settings

• The pilus clipper comes with 2 adjustable combs, a short length adjustable rummage (indicated by ane-21mm on the back of the comb) and a longer length adjustable comb (indicated by 24-44mm on the back of the comb).

Shorter Length Adjustable Comb	Longer Length Adaptable Comb
1mm	24mm
3mm	26mm
6mm	29mm
9mm	32mm
12mm	35mm
15mm	38mm
18mm	41mm
21mm	44mm

Step 1 – Nape of the neck

• Set the comb to 3mm or 6mm.
• Agree the clipper with the blade teeth pointing up. Starting time at the heart of the caput at the base of operations of the cervix.
• Slowly elevator the clipper, working upwardly and outwards through the hair, trimming just a lilliputian at a time.

Step 2 – Back of the head

• With the comb prepare at 12mm or 18mm, cut the hair at the dorsum of the head.

Step iii – Side of the head

• With the comb set up at 3mm or 6mm, trim sideburns. Then alter to the longer 9mm guide comb and continue to cut the acme of the head.

Pace 4 – Top of the head

• Apply the longer length comb zipper and gear up it to 24mm or 27mm so cutting hair on top of the head against the direction in which the hair normally grows.
• For longer hair on top, utilize the longer length comb attachment (24 – 44mm) to achieve the desired way.
• Always work from the dorsum of the head.

Step 5 – The finishing touches

• Employ the clipper without an attachment comb for close trimming effectually the base and sides of the neck.
• To produce a clean straight line at the sideburns, reverse the hair clipper.
• Place the reversed clipper at right angles to the head so the tips of the blades lightly touching the peel and then work down.

CLEANING & MAINTENANCE

• Your clipper is fitted with high quality blades.
• To ensure long lasting functioning of your clipper, clean the blades and unit regularly.
• Ever keep the attachment guide rummage on the trimmer blade.

Later Each Use

• Ensure the appliance is switched off and unplugged from the mains before cleaning.
• Brush the accumulated hair from the blades and body of the clipper.
  Do non submerge the clipper in water.
• To clean unit, wipe with a clammy fabric and dry immediately.
• Place a few drops of cutter or sewing auto oil onto the blades. Wipe off backlog oil.

Every Six Months

• Remove the 2 screws retaining the fixed blade with a screwdriver.
• Remove the bract set.
• Brush out hairs from between the blades with a soft cleaning castor.
  Do not remove the lubricating grease from the blades. It is non necessary to remove the small moving blade from the unit.
• If the moving blade has been removed this tin can be re-fitted by slotting the moving blade holder over the pivot in the eye of the interior product head.
• The groove on the moving blade just below the teeth should rest on the plastic pressure arm which rides within the groove. The fixed blade should be assembled with the bevelled edge of the ii screw holes facing outward and fixed with screws.
• Note that if the blades are not correctly aligned then cutting efficiency will be impaired.

Storage

When not in use, unplug the pilus clipper and store it out of reach of children in a safe dry place. Never wrap the cord around the hair clipper as this will crusade the cord to wear prematurely and interruption. Handle the cord carefully for long life and avoid jerking, twisting or straining especially at the plug connections.

BATTERY DISPOSAL

Annotation: The battery is not intended to exist removed or replaced under normal utilize. The only time the battery should be removed or the unit opened or disassembled, is at the finish of the product's useful life before information technology is discarded.

• The HC7110AU contains a nickel metal hydride battery. Once the pilus clipper has reached the end of its life, to ensure proper disposal of the product, delight take the apparatus to a recycling centre, where the internal rechargeable battery should exist removed by a professional and recycled separately.
• For more information about recycling of electrical and battery operated appliances, delight contact your local council office or your household waste disposal service.

Caution: Do not put in the fire or mutilate your batteries when disposing as they may burst and release toxic materials. Do not short circuit as it may cause burns.

This product is not suitable to apply in a bath or shower.
This product conforms to radio frequency interference requirements.
Whatever product purchased and used commercially carries a limited 90 Mean solar day Warranty.

WARRANTY AGAINST DEFECTS

Spectrum Brands Commonwealth of australia Pty Ltd and Spectrum Brands New Zealand Limited

In this warranty:

Australian Consumer Constabulary means the Australian consumer police force set out in Schedule 2 to the Competition and Consumer Act 2010;
CGA means the New Zealand Consumer Guarantees Act 1993;
Goods means the product or equipment which was accompanied by this warranty and purchased in Commonwealth of australia or New Zealand, as the case may be;
Manufacturer, Nosotros or usa means:

1. for Goods purchased in Australia, Spectrum Brands Australia Pty Ltd
   ACN, 007 070 573; or
2. for Goods purchased in New Zealand, Spectrum Brands New Zealand Limited, as the case may be, contact details as fix out at the end of this warranty;

Supplier means the authorised distributor or retailer of the Goods that sold you the Goods in Commonwealth of australia or in New Zealand; and You ways y'all, the original end-user purchaser of the Goods.

1. Our goods come with guarantees that cannot be excluded nether the Australian Consumer Law, or the CGA. Yous are entitled to a replacement or refund for a major failure and bounty for whatever other reasonably foreseeable loss or damage.
   Yous are as well entitled to accept the appurtenances repaired or replaced if the goods neglect to be of acceptable quality and the failure does non amount to a major failure.
2. The benefits provided by this Warranty are in add-on to all other rights and remedies in respect of the Goods which the consumer has under either the
   Australian Consumer Law or the CGA. The original purchaser of the Goods is
   provided with the following Warranty subject to the Warranty Conditions:
3. Nosotros warrant the Appurtenances for all parts lacking in workmanship or materials for the period of ii (2) years from the date of purchase (Warranty Period). If the Goods evidence defective within the Warranty Flow by reason of improper workmanship or textile, we may, at our own discretion, repair or replace the Goods without accuse.
   Warranty Weather condition
4. The Goods must be used in accordance with the manufacturer'south instructions. This Warranty does not apply should the defect in or failure of the Goods be attributable to misuse, abuse, accident or non-observance of manufacturer's instructions on the part of the user. As far equally the law permits, the manufacturer does not take liability for whatsoever direct or consequential loss, harm or other expense caused by or arising out of whatever failure to use the Goods in accordance with the manufacturer'southward instructions.
5. Consumable parts (such every bit shaver heads, cutters and foils) of the Goods are included under this Warranty only where there is a defect in workmanship or materials used.
6. The warranty granted under clause 3 is express to repair or replacement simply.
7. Any parts of the Goods replaced during repairs or whatsoever product replaced remain the property of the manufacturer. In the effect of the Goods being replaced during the Warranty Catamenia, the warranty on the replacement Appurtenances will expire on the aforementioned date as for the Warranty Flow on the original Goods which are replaced.
8. In order to claim nether the warranty granted under clause 3 you lot must:
   (a) Retain this warranty with your receipt/proof of purchase; and
   (b) Render the Goods to us at the relevant address below or to the Supplier by prepaid freight within the Warranty Flow accompanied with (i) the legible and unmodified original proof of purchase, which conspicuously indicates the name and address of the Supplier, the date and place of buy, the production name or other production serial number and (two) this warranty.
9. This warranty is immediately void if:
   (a) Any serial number or apparatus plate is removed or defaced;
   (b) The Appurtenances have been serviced or otherwise repaired by a person not authorised to exercise so past us or where not approved replaced parts are used.
10. The Goods are designed for domestic use only. A express 90-day Warranty applies to whatever industrial or commercial utilize of the Goods. The Appurtenances must be connected to the electrical voltage requirements equally specified in the ratings label located on the Appurtenances.
11. This warranty does non comprehend the cost of claiming under the warranty or transport of the Goods to and from the Supplier or us.
12. This warranty is but valid and enforceable in Commonwealth of australia against Spectrum Brands Commonwealth of australia Pty Ltd and in New Zealand against Spectrum Brands New Zealand Limited.

Contact us or the Supplier for further details.

Spectrum Brands Australia Pty Ltd
Locked Bag 3004
Braeside, VIC 3195
Australia
Customer service in Australia: 1800 623 118
Email: [electronic mail protected]
Website: world wide web.remington-products.com.au

Spectrum Brands New Zealand Limited
PO Box 9817
Newmarket, Auckland 1149
NEW ZEALAND
Customer service in New Zealand: 0800 736 776
E-mail: [e-mail protected]
Website: www.remington.co.nz

Documents / Resources

References

Remington Hair Clippers How To Use,

Source: https://manuals.plus/remington/haircut-kit-manual

Posted by: jacksonsheyesseet.blogspot.com

Share this post